Resmed AirStart 10 APAP - Co pack

MODEL

37365

HSN CODE

90192090

EAN UPC CODE

EAN - NA

Close
Brand: ResMed
Category: Device > Sleep
 
AirStart 10 APAP 

AirStart™ 10 APAP is ResMed’s auto-adjusting positive airway pressure (APAP) therapy device. Part of ResMed Air Solutions, it offers 
excellent value for those seeking an APAP device that’s simple to set up and use.

Built-in humidification
Heated humidification may help reduce the common side effects of therapy, such as nasal congestion and a dry nose or throat, to deliver even more comfort during the night.Every AirStart 10 therapy device comes with a built-in HumidAir™ humidifier, so your patients can enjoy all the benefits of humidification in one out-of-the-box solution. The humidifier tub is also intuitive to use and manage making humidification easy and accessible for more patients

Other features 

  • Therapy made easy. The AirStart 10 APAP therapy device is designed to be intuitive and easy-to-use. With no complicated menus or settings to navigate, patients can simply plug in the device and press Start.
  • Excellent value. With out-of-the-box simplicity, AirStart 10 devices give you excellent value on the latest technology platform.
  • Height - 116 mm
  • Weight - 1106 gm
  • Breadth - 205 mm
  • Length - 150 mm
  • Sound pressure level - 26.6 dBA with uncertainty of 2 dBA as measured according to ISO 17510-1:2009 (CPAP mode)
  • Modes - CPAP, APAP, Ramp
  • Sound power level - 26.6 dBA with uncertainty of 2 dBA
  • Peak power consumption - 104W (108VA)
  • Operating pressure range - 4–20 cm H2O
  • Supplemental oxygen Maximum flow - Recommended maximum flow: 4 L/min
  • Power supply unit - 90W power supply unit
  • Storage and transport humidity - 5 to 95% relative humidity, non-condensing
  • Storage and transport temperature - -20°C to +60°C
  • Operating humidity - 10 to 95% relative humidity, non-condensing
  • Housing construction - Flame retardant engineering thermoplastic
  • Air outlet - 22 mm air outlet complies with ISO 5356-1:2004
  • Typical power consumption - 53W (57VA)
  • Sensors - Pressure sensor: Internally located at device outlet, analogue gauge pressure type, -5 to +45 cm H2O (-5 to +45 hPa) Flow sensor: Internally located at device inlet, digital mass flow type, -70 to +180 L/min
  • Operating altitude - Sea level to 2,591 m; air pressure range 1013 hPa to 738 hPa
  • Operating temperature - +5°C to +35°C
  • Maximum single fault steady state pressure - Device will shut down in the presence of a single fault if the steady state pressure exceeds: 30 cm H2O (30 hPa) for more than 6 sec or 40 cm H2O (40 hPa) for more than 1 sec.

Send Enquiry to Manufacturer

Enquire about the price, product information and specification. Enquiry will be sent to Manufacturer and their authorized dealers only.
Create Enquiry Buy Direct
Enquire directly with ResMed and their authorized dealers on the platform